Description
Anvil-Strut™ Concrete Insert, Continuous, Series: FIG AS 349, 20 ft Length, 1-3/8 in Width, 1-5/8 in D, 12 ga Thickness, 2500 to 3000 lb, Plain
Features:
- Anvil-Strut Concrete Inserts are designed for the attachment or suspension of framing, piping or equipment to concrete structures where a continuous insert slot is required.
- Loading data was calculated in a concrete mixture which was proportioned so that the compression strength of the concrete was 2,500 to 3,000 pounds per square in and that the load is dependent on the surrounding concrete
- Tests were performed with a safety factor of 3 and in accordance with the MFMA specifications
- Anvil-Strut™ concrete inserts are supplied with AS 656 end cap and either a styrofoam filler or plastic strip (AS 6151) installed in the insert channel to prevent any concrete seepage
- Stocked in either plain and pre-galvanized
- Inserts should be secured to forms at 16 in intervals
- 1-3/8 in L x 1-5/8 in W x 12 in H gauge channel
