Flange Mount Bearing, 2-1/2 in Bore, Dodge® Type E Imperial

Description

Dodge® Flange Mount Bearing, Type E Imperial Non-Expansion Square, Series: 207, 2-1/2 in Bore, 5.37 in Bolt Center-to-Center Length, 7.6 in Diameter Bolt Circle, 4-Bolt Flange Mounting, 6.88 in Overall Length/Diameter, 4.41 in Overall Depth, 6.88 in Overall Height, Tapered Adapter Sleeve Locking Device, Cast Iron Bearing, 39000 lb Dynamic/47500 lb Static Load, 3800 rpm Maximum, -100 to 250 deg F

Features:

• Steel cage with guide rings offers precision roller guidance
• Adapter sleeve improves concentricity and reduces inherent vibration
• Ease in mounting and dismounting achieved through patented adapter system
• Push-pull adapter mount
• Grease limiting speeds 30% higher than setscrew mounts
• All housings are class 30 gray iron
• Shaft ready installation
• Superior holding power reduces the fretting corrosion caused by vibration
• Seal/land on OD of inner ring maintains full contact pressure even when misaligned
• Less shaft damage vs setscrew mounts
• Reduced vibration damage vs setscrew mounts

Standards/Approval:

• ARRA Compliant
• Buy American Act Compliant
• RoHS Compliant
• UL Listed
• AGMA
• MPTA
• ABMA
• BSA
• PTDA
• CMA
• HI

Bearing Material	Cast Iron
Bolt Center-to-Center Length	5.37 in
Bolt Circle Diameter	7.6 in
Bore Diameter	2-1/2 in
Flange Mounting Type	4-Bolt
Load Capacity	39000 lb Dynamic/47500 lb Static
Locking Device	Tapered Adapter Sleeve
Maximum Speed	3800 rpm
Overall Depth	4.41 in
Overall Height	6.88 in
Overall Length/Diameter	6.88 in
Series	207
Temperature Rating	-100 to 250 deg F
Type	Type E Imperial Non-Expansion Square
Manufacturer	Dodge®