Dodge® Flange Mount Bearing, 4 in Bore, Series 315

Description

Dodge® Flange Mount Bearing, Type E Imperial Non-Expansion Square, Series: 315, 4 in Bore, 7-3/4 in Bolt Center-to-Center Length, 10.96 in Diameter Bolt Circle, 4-Bolt Flange Mounting, 10-1/4 in Overall Length/Diameter, 6.73 in Overall Depth, 10-1/4 in Overall Height, Tapered Adapter Sleeve Locking Device, Cast Iron Bearing, 83000 lb Dynamic/104000 lb Static Load, 1530 rpm Maximum, -100 to 250 deg F

Features:

• Steel cage with guide rings offers precision roller guidance
• Adapter sleeve improves concentricity and reduces inherent vibration
• Ease in mounting and dismounting achieved through patented adapter system
• Push-pull adapter mount
• Grease limiting speeds 30% higher than setscrew mounts
• All housings are class 30 gray iron
• Shaft ready installation
• Superior holding power reduces the fretting corrosion caused by vibration
• Seal/land on OD of inner ring maintains full contact pressure even when misaligned
• Less shaft damage vs setscrew mounts
• Reduced vibration damage vs setscrew mounts

Standards/Approval:

• ARRA Compliant
• Buy American Act Compliant
• RoHS Compliant
• UL Listed
• AGMA
• MPTA
• ABMA
• BSA
• PTDA
• CMA
• HI

Warranty:

Limited

Bearing Material	Cast Iron
Bolt Center-to-Center Length	7-3/4 in
Bolt Circle Diameter	10.96 in
Bore Diameter	4 in
Flange Mounting Type	4-Bolt
Load Capacity	83000 lb Dynamic/104000 lb Static
Locking Device	Tapered Adapter Sleeve
Maximum Speed	1530 rpm
Overall Depth	6.73 in
Overall Height	10-1/4 in
Overall Length/Diameter	10-1/4 in
Series	315
Temperature Rating	-100 to 250 deg F
Type	Type E Imperial Non-Expansion Square
Manufacturer	Dodge®