Dodge® Pillow Block Roller Bearing Unit, 3 in Bore, Series 215

Description

Dodge® Pillow Block Roller Bearing Unit, Imperial Type E, Series: 215, 3 in Bore, 9.31 to 9.69 in Bolt Center-to-Center Length, 3-1/8 in Base to Bore Centerline, 12 in Overall Length, 3-1/2 in Overall Width, 6.32 in Overall Height, Two-Bolt Base Mounting, Round Bore, 2.99 in Base Width, Set Screw Locking Device, Stamping Seal, Expansion Expansion, 41500 lb Dynamic/53000 lb Static Load, 2250 rpm Maximum, Cast Iron, Uncoated

Features:

• Push pull adapter mount
• Grease limiting speeds 30% higher than set screw mounts
• Patented adapter mounting system
• Superior holding power reduces the fretting corrosion caused by vibration
• Seal/land on OD of inner ring maintains full contact pressure even when misaligned

Standards/Approval:

• UL Listed

Base to Bore Centerline	3-1/8 in
Base Width	2.99 in
Bolt Center-to-Center Length	9.31 to 9.69 in
Bore Diameter	3 in
Bore Type	Round
Expansion Type	Expansion
Finish	Uncoated
Load Capacity	41500 lb Dynamic/53000 lb Static
Locking Device	Set Screw
Material	Cast Iron
Maximum Speed	2250 rpm
Mounting Type	Two-Bolt Base
Overall Height	6.32 in
Overall Length	12 in
Overall Width	3-1/2 in
Seal Type	Stamping
Series	215
Manufacturer	Dodge®