Dodge® Pillow Block Roller Bearing Unit, 2-7/16 in Bore, Series 207

Description

Dodge® Pillow Block Roller Bearing Unit, Imperial Type E, Series: 207, 2-7/16 in Bore, 8.38 to 8.62 in Bolt Center-to-Center Length, 2-3/4 in Base to Bore Centerline, 10-1/2 in Overall Length, 3.42 in Overall Width, 5.71 in Overall Height, Two-Bolt Base Mounting, Round Bore, 2.87 in Base Width, Set Screw Locking Device, Stamping Seal, Expansion Expansion, 39000 lb Dynamic/47500 lb Static Load, 2400 rpm Maximum, Cast Iron, Uncoated

Features:

• Push pull adapter mount
• Grease limiting speeds 30% higher than set screw mounts
• Patented adapter mounting system
• Superior holding power reduces the fretting corrosion caused by vibration
• Seal/land on OD of inner ring maintains full contact pressure even when misaligned

Standards/Approval:

• UL Listed

Base to Bore Centerline	2-3/4 in
Base Width	2.87 in
Bolt Center-to-Center Length	8.38 to 8.62 in
Bore Diameter	2-7/16 in
Bore Type	Round
Expansion Type	Expansion
Finish	Uncoated
Load Capacity	39000 lb Dynamic/47500 lb Static
Locking Device	Set Screw
Material	Cast Iron
Maximum Speed	2400 rpm
Mounting Type	Two-Bolt Base
Overall Height	5.71 in
Overall Length	10-1/2 in
Overall Width	3.42 in
Seal Type	Stamping
Series	207
Manufacturer	Dodge®