Pillow Block Roller Bearing, 1-11/16 in Bore, Dodge®

Description

Dodge® Pillow Block Roller Bearing, Imperial Type E, Series: 111, 1-11/16 in Bore, 6.13 to 6.38 in Bolt Center-to-Center Length, 2-1/8 in Base to Bore Centerline, 7.88 in Overall Length, 2.81 in Overall Width, 4-1/4 in Overall Height, Two-Bolt Base Mounting, Round Bore, 2.38 in Base Width, Tapered Adapter Sleeve Locking Device, Labyrinth Metallic Seal, Expansion, 20800 lb Dynamic/22000 lb Static Load, -100 to 250 deg F, 5600 rpm Maximum, Cast Iron

Features:

• Steel cage with guide rings offers precision roller guidance
• Adapter sleeve improves concentricity and reduces inherent vibration
• Ease in mounting and dismounting achieved through patented adapter system
• Push-pull adapter mount
• Grease limiting speeds 30% higher than setscrew mounts
• All housings are class 30 gray iron
• Shaft ready installation
• Superior holding power reduces the fretting corrosion caused by vibration
• Seal/land on OD of inner ring maintains full contact pressure even when misaligned
• Less shaft damage vs setscrew mounts
• Reduced vibration damage vs setscrew mounts

Standards/Approval:

• ARRA Compliant
• Buy American Act Compliant
• RoHS Compliant
• UL Listed
• AGMA
• MPTA
• ABMA
• BSA
• PTDA
• CMA
• HI

Base to Bore Centerline	2-1/8 in
Base Width	2.38 in
Bolt Center-to-Center Length	6.13 to 6.38 in
Bore Diameter	1-11/16 in
Bore Type	Round
Expansion Type	Expansion
Load Capacity	20800 lb Dynamic/22000 lb Static
Locking Device	Tapered Adapter Sleeve
Material	Cast Iron
Maximum Speed	5600 rpm
Mounting Type	Two-Bolt Base
Overall Height	4-1/4 in
Overall Length	7.88 in
Overall Width	2.81 in
Seal Type	Labyrinth Metallic
Series	111
Temperature Rating	-100 to 250 deg F
Manufacturer	Dodge®