Description
Dodge® Pillow Block Roller Bearing Unit, Imperial, 4-7/16 in Bore, 12 to 14 in Bolt Center-to-Center Length, 4-3/4 in Base to Bore Centerline, 16-1/2 in Overall Length, 5.23 in Overall Width, 9.63 in Overall Height, Four-Bolt Base Mounting, 4-3/4 in Base Width, Tapered Adapter Sleeve Locking Device, Trident™ Triple Lip Seal, Non-Expansion (Fixed) Expansion, 104000 lb Dynamic/132000 lb Static Load, 2000 rpm Maximum, Cast Iron
Features:
- Push pull adapter mount
- Grease limiting speeds 30% higher than setscrew mounts
- Same rolling element as the S-2000 bearing
- Pillow blocks are interchangeable with S-2000 dimensions on all sizes
- All housings are class 30 gray iron
- Can replace 300 series ball bearings in many applications
- Patented adapter mounting system
- Superior holding power reduces the fretting corrosion caused by vibration
- Shaft ready installation
- No special tools required for installation
- Seal/land on OD of inner ring maintains full contact pressure even when misaligned
- Less shaft damage verses setscrew mounts
- Dodge® Trident™ triple lip seal provides superior sealing system
- Both ends open
Applications:
Air Handling, Food, Beverage, Pharmaceutical, Conveyors, Fans, Paper and Forest Industries
Standards/Approval:
- AFBMA/AGMA/ASAMMA/BSA/CMA/MPTA/PTDA Standards
- UL Listed
