Dodge® Pillow Block Roller Bearing, 2 in Bore, Imperial, Fixed

Description

Dodge® Pillow Block Roller Bearing Unit, Imperial, 2 in Bore, 6.06 to 6.44 in Bolt Center-to-Center Length, 2-1/4 in Base to Bore Centerline, 8.38 in Overall Length, 2.86 in Overall Width, 4.56 in Overall Height, Two-Bolt Base Mounting, 2-1/2 in Base Width, Tapered Adapter Sleeve Locking Device, Metal Labyrinth Seal, Non-Expansion (Fixed), 22000 lb Dynamic/24000 lb Static Load, 400 deg F, 5300 rpm Maximum, Cast Iron

Features:

• Push pull adapter mount
• Grease limiting speeds 30% higher than setscrew mounts
• Same rolling element as the S-2000 bearing
• Pillow blocks are interchangeable with S-2000 dimensions on all sizes
• All housings are class 30 gray iron
• Can replace 300 series ball bearings in many applications
• Patented adapter mounting system
• Superior holding power reduces the fretting corrosion caused by vibration
• Shaft ready installation
• No special tools required for installation
• Seal/land on OD of inner ring maintains full contact pressure even when misaligned
• Less shaft damage verses setscrew mounts
• Both ends open

Applications:

Air Handling, Food, Beverage, Pharmaceutical, Conveyors, Fans, Paper and Forest Industries

Standards/Approval:

• AFBMA/AGMA/ASAMMA/BSA/CMA/MPTA/PTDA Standards
• UL Listed

Base to Bore Centerline	2-1/4 in
Base Width	2-1/2 in
Bolt Center-to-Center Length	6.06 to 6.44 in
Bore Diameter	2 in
Expansion Type	Non-Expansion (Fixed)
Load Capacity	22000 lb Dynamic/24000 lb Static
Locking Device	Tapered Adapter Sleeve
Material	Cast Iron
Maximum Speed	5300 rpm
Mounting Type	Two-Bolt Base
Overall Height	4.56 in
Overall Length	8.38 in
Overall Width	2.86 in
Seal Type	Metal Labyrinth
Temperature Rating	400 deg F
Type	Imperial
Manufacturer	Dodge®