Dodge® Pillow Block Roller Bearing, 2-3/16 in Bore, Cast Iron

Description

Dodge® Pillow Block Roller Bearing Unit, Imperial Type E, Series: 203, 2-3/16 in Bore, 7.63 to 7.88 in Bolt Center-to-Center Length, 2-1/2 in Base to Bore Centerline, 9.62 in Overall Length, 3.03 in Overall Width, 5 in Overall Height, Two-Bolt Base Mounting, Round Bore, 2.56 in Base Width, Set Screw Locking Device, Trident™ Triple Lip Seal, Non-Expansion (Fixed) Expansion, 27000 lb Dynamic/29000 lb Static Load, 3000 rpm Maximum, Cast Iron, Uncoated

Features:

• Push pull adapter mount
• Grease limiting speeds 30% higher than set screw mounts
• Patented adapter mounting system
• Superior holding power reduces the fretting corrosion caused by vibration
• Seal/land on OD of inner ring maintains full contact pressure even when misaligned

Standards/Approval:

• UL Listed

Base to Bore Centerline	2-1/2 in
Base Width	2.56 in
Bolt Center-to-Center Length	7.63 to 7.88 in
Bore Diameter	2-3/16 in
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Uncoated
Load Capacity	27000 lb Dynamic/29000 lb Static
Locking Device	Set Screw
Material	Cast Iron
Maximum Speed	3000 rpm
Mounting Type	Two-Bolt Base
Overall Height	5 in
Overall Length	9.62 in
Overall Width	3.03 in
Seal Type	Trident™ Triple Lip
Series	203
Manufacturer	Dodge®