Dodge® Pillow Block Roller Bearing, 3 in Bore, Series 215, Cast Iron

Description

Dodge® Pillow Block Roller Bearing, Imperial, Series: 215, 3 in Bore, 7.94 to 8.31 in Bolt Center-to-Center Length, 3-1/4 in Base to Bore Centerline, 10.44 in Overall Length, 3-1/2 in Overall Width, 6.38 in Overall Height, Two-Bolt Base Mounting, Round Bore, 3.08 in Base Width, Tapered Adapter Sleeve Locking Device, Labyrinth Metallic Seal, Expansion, 41500 lb Dynamic/53000 lb Static Load, -100 to 250 deg F, 3400 rpm Maximum, Cast Iron, Uncoated

Features:

• Steel cage with guide rings offers precision roller guidance
• Adapter sleeve improves concentricity and reduces inherent vibration
• Ease in mounting and dismounting achieved through patented adapter system
• Push-pull adapter mount
• Grease limiting speeds 30% higher than setscrew mounts
• All housings are class 30 gray iron
• Shaft ready installation
• Superior holding power reduces the fretting corrosion caused by vibration
• Seal/land on OD of inner ring maintains full contact pressure even when misaligned
• Less shaft damage vs setscrew mounts
• Reduced vibration damage vs setscrew mounts

Standards/Approval:

• ARRA Compliant
• Buy American Act Compliant
• RoHS Compliant
• UL Listed
• AGMA
• MPTA
• ABMA
• BSA
• PTDA
• CMA
• HI

Warranty:

Limited

Base to Bore Centerline	3-1/4 in
Base Width	3.08 in
Bolt Center-to-Center Length	7.94 to 8.31 in
Bore Diameter	3 in
Bore Type	Round
Expansion Type	Expansion
Finish	Uncoated
Load Capacity	41500 lb Dynamic/53000 lb Static
Locking Device	Tapered Adapter Sleeve
Material	Cast Iron
Maximum Speed	3400 rpm
Mounting Type	Two-Bolt Base
Overall Height	6.38 in
Overall Length	10.44 in
Overall Width	3-1/2 in
Seal Type	Labyrinth Metallic
Series	215
Manufacturer	Dodge®