Dodge® Pillow Block Roller Bearing Unit, 2-1/4 in Bore, Series 203

Description

Dodge® Pillow Block Roller Bearing Unit, Imperial, Series: 203, 2-1/4 in Bore, 6.56 to 6.94 in Bolt Center-to-Center Length, 2-1/4 in Base to Bore Centerline, 8.38 in Overall Length, 3.03 in Overall Width, 5 in Overall Height, Two-Bolt Base Mounting, Round Bore, 2.63 in Base Width, Set Screw Locking Device, Stamping Seal, Non-Expansion (Fixed) Expansion, 27000 lb Dynamic/29000 lb Static Load, 4500 rpm Maximum, Cast Iron, Uncoated

Features:

• Push pull adapter mount
• Grease limiting speeds 30% higher than set screw mounts
• Patented adapter mounting system
• Superior holding power reduces the fretting corrosion caused by vibration
• Seal/land on OD of inner ring maintains full contact pressure even when misaligned

Standards/Approval:

• UL Listed

Base to Bore Centerline	2-1/4 in
Base Width	2.63 in
Bolt Center-to-Center Length	6.56 to 6.94 in
Bore Diameter	2-1/4 in
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Uncoated
Load Capacity	27000 lb Dynamic/29000 lb Static
Locking Device	Set Screw
Material	Cast Iron
Maximum Speed	4500 rpm
Mounting Type	Two-Bolt Base
Overall Height	5 in
Overall Length	8.38 in
Overall Width	3.03 in
Seal Type	Stamping
Series	203
Manufacturer	Dodge®