Dodge® Pillow Block Roller Bearing, 1-1/4 in Bore, Series 107

Description

Dodge® Pillow Block Roller Bearing, Imperial, Series: 107, 1-1/4 in Bore, 4.81 to 5.2 in Bolt Center-to-Center Length, 1.88 in Base to Bore Centerline, 6.8 in Overall Length, 2.63 in Overall Width, 3.88 in Overall Height, Two-Bolt Base Mounting, Round Bore, 1.95 in Base Width, Tapered Adapter Sleeve Locking Device, Labyrinth Metallic Seal, Non-Expansion (Fixed), 20800 lb Dynamic/21000 lb Static Load, -100 to 250 deg F, 6000 rpm Maximum, Cast Iron, Uncoated

Features:

• Steel cage with guide rings offers precision roller guidance
• Adapter sleeve improves concentricity and reduces inherent vibration
• Ease in mounting and dismounting achieved through patented adapter system
• Push-pull adapter mount
• Grease limiting speeds 30% higher than setscrew mounts
• All housings are class 30 gray iron
• Shaft ready installation
• Superior holding power reduces the fretting corrosion caused by vibration
• Seal/land on OD of inner ring maintains full contact pressure even when misaligned
• Less shaft damage vs setscrew mounts
• Reduced vibration damage vs setscrew mounts

Standards/Approval:

• ARRA Compliant
• Buy American Act Compliant
• RoHS Compliant
• UL Listed
• AGMA
• MPTA
• ABMA
• BSA
• PTDA
• CMA
• HI

Warranty:

Limited

Base to Bore Centerline	1.88 in
Base Width	1.95 in
Bolt Center-to-Center Length	4.81 to 5.2 in
Bore Diameter	1-1/4 in
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Uncoated
Load Capacity	20800 lb Dynamic/21000 lb Static
Locking Device	Tapered Adapter Sleeve
Material	Cast Iron
Maximum Speed	6000 rpm
Mounting Type	Two-Bolt Base
Overall Height	3.88 in
Overall Length	6.8 in
Overall Width	2.63 in
Seal Type	Labyrinth Metallic
Series	107
Manufacturer	Dodge®