Dodge® Pillow Block Roller Bearing Unit, 2-1/2 in Bore, Series 207

Description

Dodge® Pillow Block Roller Bearing Unit, Imperial, Series: 207, 2-1/2 in Bore, 6.94 to 7.31 in Bolt Center-to-Center Length, 2-3/4 in Base to Bore Centerline, 9-1/4 in Overall Length, 3.42 in Overall Width, 5.59 in Overall Height, Two-Bolt Base Mounting, Round Bore, 2.86 in Base Width, Adapter Mounted Locking Device, Trident™ Triple Lip Seal, Expansion Expansion, 39000 lb Dynamic/47500 lb Static Load, 2400 rpm Maximum, Cast Iron, Uncoated

Features:

• Push pull adapter mount
• Grease limiting speeds 30% higher than set screw mounts
• Patented adapter mounting system
• Superior holding power reduces the fretting corrosion caused by vibration
• Seal/land on OD of inner ring maintains full contact pressure even when misaligned

Standards/Approval:

• UL Listed

Base to Bore Centerline	2-3/4 in
Base Width	2.86 in
Bolt Center-to-Center Length	6.94 to 7.31 in
Bore Diameter	2-1/2 in
Bore Type	Round
Expansion Type	Expansion
Finish	Uncoated
Load Capacity	39000 lb Dynamic/47500 lb Static
Locking Device	Adapter Mounted
Material	Cast Iron
Maximum Speed	2400 rpm
Mounting Type	Two-Bolt Base
Overall Height	5.59 in
Overall Length	9-1/4 in
Overall Width	3.42 in
Seal Type	Trident™ Triple Lip
Series	207
Manufacturer	Dodge®