Dodge® Pillow Block Roller Bearing Unit, 1-7/8 in Bore, Series 115

Description

Dodge® Pillow Block Roller Bearing Unit, Imperial, Series: 115, 1-7/8 in Bore, 6.06 to 6.44 in Bolt Center-to-Center Length, 2-1/4 in Base to Bore Centerline, 8.38 in Overall Length, 2.86 in Overall Width, 4.56 in Overall Height, Two-Bolt Base Mounting, Round Bore, 2-1/2 in Base Width, Set Screw Locking Device, Trident™ Triple Lip Seal, Non-Expansion (Fixed) Expansion, 22000 lb Dynamic/24000 lb Static Load, 3520 rpm Maximum, Cast Iron, Uncoated

Features:

• Push pull adapter mount
• Grease limiting speeds 30% higher than set screw mounts
• Patented adapter mounting system
• Superior holding power reduces the fretting corrosion caused by vibration
• Seal/land on OD of inner ring maintains full contact pressure even when misaligned

Standards/Approval:

• UL Listed

Base to Bore Centerline	2-1/4 in
Base Width	2-1/2 in
Bolt Center-to-Center Length	6.06 to 6.44 in
Bore Diameter	1-7/8 in
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Uncoated
Load Capacity	22000 lb Dynamic/24000 lb Static
Locking Device	Set Screw
Material	Cast Iron
Maximum Speed	3520 rpm
Mounting Type	Two-Bolt Base
Overall Height	4.56 in
Overall Length	8.38 in
Overall Width	2.86 in
Seal Type	Trident™ Triple Lip
Series	115
Manufacturer	Dodge®