Dodge® Pillow Block Roller Bearing, 1-11/16 in Bore, Imperial

Description

Dodge® Pillow Block Roller Bearing Unit, Imperial, 1-11/16 in Bore, 5.31 to 5.7 in Bolt Center-to-Center Length, 2.13 in Base to Bore Centerline, 7.38 in Overall Length, 2.81 in Overall Width, 4.27 in Overall Height, Two-Bolt Base Mounting, Round Bore, 2.06 in Base Width, Adapter Mounted Locking Device, Trident™ Triple Lip Seal, Non-Expansion (Fixed) Expansion, 20800 lb Dynamic/21000 lb Static Load, 3725 rpm Maximum, Cast Iron, Uncoated

Features:

• Push pull adapter mount
• Grease limiting speeds 30% higher than set screw mounts
• Patented adapter mounting system
• Superior holding power reduces the fretting corrosion caused by vibration
• Seal/land on OD of inner ring maintains full contact pressure even when misaligned

Standards/Approval:

• UL Listed

Base to Bore Centerline	2.13 in
Base Width	2.06 in
Bolt Center-to-Center Length	5.31 to 5.7 in
Bore Diameter	1-11/16 in
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Uncoated
Load Capacity	20800 lb Dynamic/21000 lb Static
Locking Device	Adapter Mounted
Material	Cast Iron
Maximum Speed	3725 rpm
Mounting Type	Two-Bolt Base
Overall Height	4.27 in
Overall Length	7.38 in
Overall Width	2.81 in
Seal Type	Trident™ Triple Lip
Type	Imperial
Manufacturer	Dodge®