Dodge® Pillow Block Roller Bearing, 1-7/16 in Bore, Series 107

Description

Dodge® Pillow Block Roller Bearing Unit, Imperial, Series: 107, 1-7/16 in Bore, 4.81 to 5.2 in Bolt Center-to-Center Length, 1.88 in Base to Bore Centerline, 6.8 in Overall Length, 2.63 in Overall Width, 3.88 in Overall Height, Two-Bolt Base Mounting, Round Bore, 1.95 in Base Width, Adapter Mounted Locking Device, Trident™ Triple Lip Seal, Non-Expansion (Fixed) Expansion, 20800 lb Dynamic/21000 lb Static Load, 3975 rpm Maximum, Cast Iron, Uncoated

Features:

• Push pull adapter mount
• Grease limiting speeds 30% higher than set screw mounts
• Patented adapter mounting system
• Superior holding power reduces the fretting corrosion caused by vibration
• Seal/land on OD of inner ring maintains full contact pressure even when misaligned

Standards/Approval:

• UL Listed

Base to Bore Centerline	1.88 in
Base Width	1.95 in
Bolt Center-to-Center Length	4.81 to 5.2 in
Bore Diameter	1-7/16 in
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Uncoated
Load Capacity	20800 lb Dynamic/21000 lb Static
Locking Device	Adapter Mounted
Material	Cast Iron
Maximum Speed	3975 rpm
Mounting Type	Two-Bolt Base
Overall Height	3.88 in
Overall Length	6.8 in
Overall Width	2.63 in
Seal Type	Trident™ Triple Lip
Series	107
Manufacturer	Dodge®