Dodge® E-Z-Kleen® Pillow Block Bearing, 1-1/8 in Bore, Series 206

Description

Dodge® E-Z-Kleen® Pillow Block Ball Bearing Unit, Normal Duty, Series: 206, 1-1/8 in Bore, 4.6 to 4.88 in Bolt Center-to-Center Length, 1.69 in Base to Bore Centerline, 6.3 in Overall Length, 1.52 in Overall Width, 3.34 in Overall Height, Two-Bolt Base Mounting, Round Bore, 1.77 in Base Width, 65 deg Set Screw Locking Device, Single Lip Seal, Non-Expansion (Fixed) Expansion, 4368 lb Dynamic/2538 lb Static Load, 5250 rpm Maximum, Polymer, Uncoated

Features:

• 65 deg setscrew locking system
• Wide inner ring design
• Housings feature a solid base, with no cavities or fillings to trap contaminants
• Mechanically retained QuadGuard™ triple lip seal features a rubberized flinger that closes the gap left by conventional all metal flinger designs
• Maxlife™ cage creates grease compartments around each rolling element, allowing balls to be constantly in contact with grease and retain grease during high pressure washdown
• H1 registered food grade lubricant
• Higher back pillow block

Applications:

Food, Beverage and Pharmaceutical, Conveyors, Mixers, Sorters and Packaging

Standards/Approval:

• FDA/USDA Complaint

Warranty:

Limited

Base to Bore Centerline	1.69 in
Base Width	1.77 in
Bolt Center-to-Center Length	4.6 to 4.88 in
Bore Diameter	1-1/8 in
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Uncoated
Load Capacity	4368 lb Dynamic/2538 lb Static
Locking Device	65 deg Set Screw
Material	Polymer
Maximum Speed	5250 rpm
Mounting Type	Two-Bolt Base
Overall Height	3.34 in
Overall Length	6.3 in
Overall Width	1.52 in
Seal Type	Single Lip
Series	206
Manufacturer	Dodge®