Dodge® 206 Pillow Block Bearing, 1-1/4 in Bore, Normal Duty

Description

Dodge® E-Z-Kleen® Pillow Block Ball Bearing Unit, Normal Duty, Series: 206, 1-1/4 in Bore, 3 in Bolt Center-to-Center Length, 1.69 in Base to Bore Centerline, 4.38 in Overall Length, 1.52 in Overall Width, 3.38 in Overall Height, Tapped Base Mounting, Round Bore, 1.57 in Base Width, 65 deg Set Screw Locking Device, Single Lip Seal, Non-Expansion (Fixed) Expansion, 4368 lb Dynamic/2538 lb Static Load, 5250 rpm Maximum, Polymer, Uncoated

Features:

• 65 deg setscrew locking system
• Wide inner ring design
• Housings feature a solid base, with no cavities or fillings to trap contaminants
• Mechanically retained QuadGuard™ triple lip seal features a rubberized flinger that closes the gap left by conventional all metal flinger designs
• Maxlife™ cage creates grease compartments around each rolling element, allowing balls to be constantly in contact with grease and retain grease during high pressure washdown
• H1 registered food grade lubricant

Applications:

Food, Beverage and Pharmaceutical, Conveyors, Mixers, Sorters and Packaging

Standards/Approval:

• FDA/USDA Complaint

Warranty:

Limited

Base to Bore Centerline	1.69 in
Base Width	1.57 in
Bolt Center-to-Center Length	3 in
Bore Diameter	1-1/4 in
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Uncoated
Load Capacity	4368 lb Dynamic/2538 lb Static
Locking Device	65 deg Set Screw
Material	Polymer
Maximum Speed	5250 rpm
Mounting Type	Tapped Base
Overall Height	3.38 in
Overall Length	4.38 in
Overall Width	1.52 in
Seal Type	Single Lip
Series	206
Manufacturer	Dodge®