Dodge® Pillow Block Bearing, 25 mm Bore, Cast Iron, Solidlube

Description

Dodge® Pillow Block Plain Sleeve Bearing, Solidlube, Series: LT1000, 25 mm Bore, 93.7 to 114.3 mm Bolt Center-to-Center Length, 33.3 mm Base to Bore Centerline, 139.7 mm Overall Length, 27 mm Overall Width, 67.5 mm Overall Height, Two-Bolt Base Mounting, Round Bore, 35.7 mm Base Width, Unsealed Seal, Non-Expansion (Fixed), 140 lb Load, -200 to 1000 deg F, 1900 rpm Maximum, Cast Iron, Powder Coated

Features:

• Self lubricating, statically self-aligning bearings for extreme industrial applications
• Good in temperature extremes and inaccessible locations
• Will function effectively in a vacuum
• Ideal where bearings are subject to dry cycles or where lube systems would be too costly
• Usable in many corrosive medias
• Will operate in submersible applications of some low viscosity liquids
• Recommended for slow speeds and limited shaft movement applications

Applications:

For high heat, cold temperatures, submersible, corrosive chemical media, slow speed and limited shaft movement applications

Warranty:

Limited

Base to Bore Centerline	33.3 mm
Base Width	35.7 mm
Bolt Center-to-Center Length	93.7 to 114.3 mm
Bore Diameter	25 mm
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Powder Coated
Load Capacity	140 lb
Material	Cast Iron
Maximum Speed	1900 rpm
Mounting Type	Two-Bolt Base
Overall Height	67.5 mm
Overall Length	139.7 mm
Overall Width	27 mm
Seal Type	Unsealed
Series	LT1000
Temperature Rating	-200 to 1000 deg F
Manufacturer	Dodge®