Pillow Block Sleeve Bearing, 40 mm Bore, 360 lb Load, Dodge® LT700

Description

Dodge® Pillow Block Plain Sleeve Bearing, Solidlube, Series: LT700, 40 mm Bore, 139.7 to 157.2 mm Bolt Center-to-Center Length, 52.4 mm Base to Bore Centerline, 188.9 mm Overall Length, 39.7 mm Overall Width, 107.2 mm Overall Height, Two-Bolt Base Mounting, Round Bore, 50.8 mm Base Width, Unsealed Seal, Non-Expansion (Fixed), 360 lb Load, -40 to 700 deg F, 1100 rpm Maximum, Cast Iron, Powder Coated

Features:

• Self lubricating, statically self-aligning bearings for extreme industrial applications
• Good in temperature extremes and inaccessible locations
• Will function effectively in a vacuum
• Ideal where bearings are subject to dry cycles or where lube systems would be too costly
• Usable in many corrosive medias
• Will operate in submersible applications of some low viscosity liquids
• Recommended for slow speeds and limited shaft movement applications

Applications:

For high heat, cold temperatures, submersible, corrosive chemical media, slow speed and limited shaft movement applications

Warranty:

Limited

Base to Bore Centerline	52.4 mm
Base Width	50.8 mm
Bolt Center-to-Center Length	139.7 to 157.2 mm
Bore Diameter	40 mm
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Powder Coated
Load Capacity	360 lb
Material	Cast Iron
Maximum Speed	1100 rpm
Mounting Type	Two-Bolt Base
Overall Height	107.2 mm
Overall Length	188.9 mm
Overall Width	39.7 mm
Seal Type	Unsealed
Series	LT700
Temperature Rating	-40 to 700 deg F
Manufacturer	Dodge®