Dodge® Pillow Block Bearing, 50 mm Bore, Solidlube, Cast Iron, 700 deg F

Description

Dodge® Pillow Block Plain Sleeve Bearing, Solidlube, Series: LT700, 50 mm Bore, 152.4 to 170 mm Bolt Center-to-Center Length, 57.2 mm Base to Bore Centerline, 206.4 mm Overall Length, 41.3 mm Overall Width, 115.1 mm Overall Height, Two-Bolt Base Mounting, Round Bore, 57.1 mm Base Width, Unsealed Seal, Non-Expansion (Fixed), 470 lb Load, -40 to 700 deg F, 900 rpm Maximum, Cast Iron, Powder Coated

Features:

• Self lubricating, statically self-aligning bearings for extreme industrial applications
• Good in temperature extremes and inaccessible locations
• Will function effectively in a vacuum
• Ideal where bearings are subject to dry cycles or where lube systems would be too costly
• Usable in many corrosive medias
• Will operate in submersible applications of some low viscosity liquids
• Recommended for slow speeds and limited shaft movement applications

Applications:

For high heat, cold temperatures, submersible, corrosive chemical media, slow speed and limited shaft movement applications

Warranty:

Limited

Base to Bore Centerline	57.2 mm
Base Width	57.1 mm
Bolt Center-to-Center Length	152.4 to 170 mm
Bore Diameter	50 mm
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Powder Coated
Load Capacity	470 lb
Material	Cast Iron
Maximum Speed	900 rpm
Mounting Type	Two-Bolt Base
Overall Height	115.1 mm
Overall Length	206.4 mm
Overall Width	41.3 mm
Seal Type	Unsealed
Series	LT700
Temperature Rating	-40 to 700 deg F
Manufacturer	Dodge®