Dodge® Pillow Block Bearing, 35 mm Bore, 300 lb Load, Cast Iron

Description

Dodge® Pillow Block Plain Sleeve Bearing, Solidlube, Series: LT700, 35 mm Bore, 119.1 to 138.1 mm Bolt Center-to-Center Length, 47.6 mm Base to Bore Centerline, 165.1 mm Overall Length, 33.3 mm Overall Width, 95.3 mm Overall Height, Two-Bolt Base Mounting, Round Bore, 44.5 mm Base Width, Unsealed Seal, Non-Expansion (Fixed), 300 lb Load, -40 to 700 deg F, 1300 rpm Maximum, Cast Iron, Powder Coated

Features:

• Self lubricating, statically self-aligning bearings for extreme industrial applications
• Good in temperature extremes and inaccessible locations
• Will function effectively in a vacuum
• Ideal where bearings are subject to dry cycles or where lube systems would be too costly
• Usable in many corrosive medias
• Will operate in submersible applications of some low viscosity liquids
• Recommended for slow speeds and limited shaft movement applications

Applications:

For high heat, cold temperatures, submersible, corrosive chemical media, slow speed and limited shaft movement applications

Warranty:

Limited

Base to Bore Centerline	47.6 mm
Base Width	44.5 mm
Bolt Center-to-Center Length	119.1 to 138.1 mm
Bore Diameter	35 mm
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Powder Coated
Load Capacity	300 lb
Material	Cast Iron
Maximum Speed	1300 rpm
Mounting Type	Two-Bolt Base
Overall Height	95.3 mm
Overall Length	165.1 mm
Overall Width	33.3 mm
Seal Type	Unsealed
Series	LT700
Temperature Rating	-40 to 700 deg F
Manufacturer	Dodge®