Dodge® Pillow Block Bearing, 3/4 in Bore, LM800 Series

Description

Dodge® Pillow Block Plain Sleeve Bearing, Solidlube, Series: LM800, 3/4 in Bore, 3 in Bolt Center-to-Center Length, 1-1/16 in Base to Bore Centerline, 4 in Overall Length, 1 in Overall Width, 2-1/16 in Overall Height, Two-Bolt Base Mounting, 1-7/32 in Base Width, Unsealed Seal, Non-Expansion (Fixed), 66 lb Load, -40 to 800 deg F, 1300 rpm Maximum, Steel, Uncoated

Features:

• Good in temperature extremes and inaccessible locations
• Will function effectively in a vacuum
• Ideal where bearings are subject to dry cycles or where lube systems would be too costly
• Usable in many corrosive medias
• Will operate in submersible applications of some low viscosity liquids

Applications:

High Heat, Cold Temperatures, Corrosive Chemical Media, Slow Speed and Limited Shaft Movement

Standards/Approval:

• UL Listed

Base to Bore Centerline	1-1/16 in
Base Width	1-7/32 in
Bolt Center-to-Center Length	3 in
Bore Diameter	3/4 in
Expansion Type	Non-Expansion (Fixed)
Finish	Uncoated
Load Capacity	66 lb
Material	Steel
Maximum Speed	1300 rpm
Mounting Type	Two-Bolt Base
Overall Height	2-1/16 in
Overall Length	4 in
Overall Width	1 in
Seal Type	Unsealed
Series	LM800
Temperature Rating	-40 to 800 deg F
Type	Solidlube
Manufacturer	Dodge®