Dodge® Pillow Block Bearing, 5 in Bore, 700 deg F, Cast Iron

Description

Dodge® Pillow Block Plain Sleeve Bearing, Solidlube, Series: MM700, 5 in Bore, 13-1/8 to 14-3/4 in Bolt Center-to-Center Length, 5 in Base to Bore Centerline, 17-7/16 in Overall Length, 5 in Overall Width, 10-1/2 in Overall Height, Four-Bolt Base Mounting, 4-3/4 in Base Width, Unsealed Seal, Non-Expansion (Fixed), 815 lb Load, -40 to 700 deg F, 350 rpm Maximum, Cast Iron, Powder Coated

Features:

• Good in temperature extremes and inaccessible locations
• Will function effectively in a vacuum
• Ideal where bearings are subject to dry cycles or where lube systems would be too costly
• Usable in many corrosive medias
• Will operate in submersible applications of some low viscosity liquids

Applications:

For slow speeds and limited shaft movement applications

Standards/Approval:

• UL Listed

Warranty:

Limited

Base to Bore Centerline	5 in
Base Width	4-3/4 in
Bolt Center-to-Center Length	13-1/8 to 14-3/4 in
Bore Diameter	5 in
Expansion Type	Non-Expansion (Fixed)
Finish	Powder Coated
Load Capacity	815 lb
Material	Cast Iron
Maximum Speed	350 rpm
Mounting Type	Four-Bolt Base
Overall Height	10-1/2 in
Overall Length	17-7/16 in
Overall Width	5 in
Seal Type	Unsealed
Series	MM700
Temperature Rating	-40 to 700 deg F
Type	Solidlube
Manufacturer	Dodge®