Pillow Block Bearing, 7/8 in Bore, Dodge® LT1000

Description

Dodge® Pillow Block Plain Sleeve Bearing, Solidlube, Series: LT1000, 7/8 in Bore, 3-11/16 to 4-1/2 in Bolt Center-to-Center Length, 1-5/16 in Base to Bore Centerline, 5-1/2 in Overall Length, 1-1/16 in Overall Width, 2-21/32 in Overall Height, Two-Bolt Base Mounting, Round Bore, 1-13/32 in Base Width, Unsealed Seal, Non-Expansion (Fixed), 32 lb Load, -200 to 1000 deg F, 1900 rpm Maximum, Cast Iron, Powder Coated

Features:

• Self lubricating, statically self-aligning bearings for extreme industrial applications
• Good in temperature extremes and inaccessible locations
• Will function effectively in a vacuum
• Ideal where bearings are subject to dry cycles or where lube systems would be too costly
• Usable in many corrosive medias
• Will operate in submersible applications of some low viscosity liquids
• Recommended for slow speeds and limited shaft movement applications

Applications:

For high heat, cold temperatures, submersible, corrosive chemical media, slow speed and limited shaft movement applications

Warranty:

Limited

Base to Bore Centerline	1-5/16 in
Base Width	1-13/32 in
Bolt Center-to-Center Length	3-11/16 to 4-1/2 in
Bore Diameter	7/8 in
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Powder Coated
Load Capacity	32 lb
Material	Cast Iron
Maximum Speed	1900 rpm
Mounting Type	Two-Bolt Base
Overall Height	2-21/32 in
Overall Length	5-1/2 in
Overall Width	1-1/16 in
Seal Type	Unsealed
Series	LT1000
Temperature Rating	-200 to 1000 deg F
Manufacturer	Dodge®