Pillow Block Bearing, 3/4 in Bore, Dodge®

Description

Dodge® Pillow Block Plain Sleeve Bearing, Solidlube, Series: LT700, 3/4 in Bore, 3-3/8 to 4-3/16 in Bolt Center-to-Center Length, 1-5/16 in Base to Bore Centerline, 5-1/4 in Overall Length, 1 in Overall Width, 2-9/16 in Overall Height, Two-Bolt Base Mounting, Round Bore, 1-11/32 in Base Width, Unsealed Seal, Non-Expansion (Fixed), 22 lb Load, -40 to 700 deg F, 2500 rpm Maximum, Cast Iron, Powder Coated

Features:

• Self lubricating, statically self-aligning bearings for extreme industrial applications
• Good in temperature extremes and inaccessible locations
• Will function effectively in a vacuum
• Ideal where bearings are subject to dry cycles or where lube systems would be too costly
• Usable in many corrosive medias
• Will operate in submersible applications of some low viscosity liquids
• Recommended for slow speeds and limited shaft movement applications

Applications:

For high heat, cold temperatures, submersible, corrosive chemical media, slow speed and limited shaft movement applications

Warranty:

Limited

Base to Bore Centerline	1-5/16 in
Base Width	1-11/32 in
Bolt Center-to-Center Length	3-3/8 to 4-3/16 in
Bore Diameter	3/4 in
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Powder Coated
Load Capacity	22 lb
Material	Cast Iron
Maximum Speed	2500 rpm
Mounting Type	Two-Bolt Base
Overall Height	2-9/16 in
Overall Length	5-1/4 in
Overall Width	1 in
Seal Type	Unsealed
Series	LT700
Temperature Rating	-40 to 700 deg F
Manufacturer	Dodge®