Timken® Fafnir® Flange Mount Ball Bearing, 1 in Bore

Description

Timken® Fafnir®, YCJ1 SGT, Flange Mount Ball Bearing Unit, Industrial Normal Duty, Series: YCJ, 1 in Bore, 2-49/64 in Bolt Center-to-Center Length, 4-Bolt Flange Mounting, 3-3/4 in Overall Length/Diameter, 1.575 in Overall Depth, 1.575 in Overall Height, Set Screw Locking Device, Steel Bearing, 3490 lb Dynamic/1760 lb Static Load, 5440 rpm Maximum, -30 to 275 deg F, Uncoated

Features:

• Incorporates shaft guarding technology, which reduces replacement time, provides shaft protection and prolongs the life of the shaft
• The same basic design as the RCJ series, except specially designed set screws are used as the locking device instead of an eccentric collar
• All units are equipped with GY-KRRB wide-inner-ring set screw bearings
• Spherical outside diameter of the bearings mounted in the corresponding machined housing seats provides the initial self-alignment
• Bolt-hole spacing dimensions are interchangeable with the RCJ series and most competitive units
• The units are factory pre-lubricated

Applications:

Agriculture, Food Processing, Fans, Blowers and Conveyors

Bearing Material	Steel
Bolt Center-to-Center Length	2-49/64 in
Bore Diameter	1 in
Finish	Uncoated
Flange Mounting Type	4-Bolt
Load Capacity	3490 lb Dynamic/1760 lb Static
Locking Device	Set Screw
Maximum Speed	5440 rpm
Overall Depth	1.575 in
Overall Height	1.575 in
Overall Length/Diameter	3-3/4 in
Series	YCJ
Temperature Rating	-30 to 275 deg F
Type	Industrial Normal Duty
Manufacturer	Fafnir®