EATON Photoelectric Sensor, 10 ft Sensing, Series 200

Description

EATON Photoelectric Sensor, Zero Pressure Accumulation, Series: 200, Rectangle Shape, Polarized Retroreflective Sensing Method, 10 ft Sensing, Red Laser Sensing Beam, 8 ms Response, NPN Output, 18 to 30 V DC, 100 mA, 250 mW Wattage, 5-Pin AMP Connector Connection, 30 gn Vibration, 1.19 in L x 1.73 in W x 1.45 in H Size, NEMA 1 Enclosure, 14 to 131 deg F Operating

Features:

• 10 mA maximum OFF-state leakage
• 2.5 V at 100 mA ON-state voltage drop
• Cycoloy and Lexan body, polycarbonate lens and glass-filled PCT connector
• 20 lb cable pull strength
• The output is protected against dead shorts only
• Output is continuously retried at 3 ms intervals and will automatically reset when short is removed (no visual indication of a short circuit condition)
• Lights steady when output is ON, OFF when output is OFF OFF when output is in short circuit mode
• Red zone status, ON when valve output is ON LED indicator
• Air to drive operating mode
• 30g over 10 Hz to 2 kHz vibration

Warranty:

3 Years

Amperage Rating	100 mA
Connection Type	5-Pin AMP Connector
Enclosure Type	NEMA 1
Operating Temperature	14 to 131 deg F
Output Type	NPN
Response Time	8 ms
Sensing Beam	Red Laser
Sensing Method	Polarized Retroreflective
Sensing Range	10 ft
Series	200
Shape	Rectangle
Size	1.19 in L x 1.73 in W x 1.45 in H
Type	Zero Pressure Accumulation
Vibration	30 gn
Voltage Rating	18 to 30 V DC
Wattage	250 mW
Manufacturer	EATON