EATON Photoelectric Sensor, 10 ft Sensing, NEMA 1 Enclosure

Description

EATON Photoelectric Sensor, Right Angle Zero Pressure Accumulation, Series: 200, Polarized Retroreflective Sensing Method, 10 ft Sensing, Visible Red Sensing Beam, 8 ms Response, NPN/PNP Output, 10 to 30 V DC, 100 mA, 120 mW Wattage, 5-Pin AMP Connection, LED Light Source, 30 g Over 10 Hz to 2 kHz Vibration, 1.15 in L x 1.15 in W x 1.45 in H Size, NEMA 1 Enclosure, 14 to 131 deg F Operating

Features:

• Non-contact, true zero pressure accumulation control without a PLC
• Low installation costs with pre-measured and connectorized wiring
• Fits zone lengths between 18 and 60 in 6 in increments and conveyors up to 60 in W
• Compatible with commonly available solenoid operated air valves
• Sensors are short circuit protected with automatic reset of sensor when short is removed
• System designed with sub 4 A, 24 VDC wiring for safety and reduced installation costs
• Easily interfaced to external control systems for singulated discharge and/or slug release
• Highly optimized, low cost power supply

Standards/Approval:

• cULus Listed,UL Listed,Contact Manufacturer

Warranty:

3 years

Amperage Rating	100 mA
Connection Type	5-Pin AMP
Enclosure Type	NEMA 1
Light Source	LED
Operating Temperature	14 to 131 deg F
Output Type	NPN/PNP
Response Time	8 ms
Sensing Beam	Visible Red
Sensing Method	Polarized Retroreflective
Sensing Range	10 ft
Series	200
Size	1.15 in L x 1.15 in W x 1.45 in H
Type	Right Angle Zero Pressure Accumulation
Vibration	30 g Over 10 Hz to 2 kHz
Voltage Rating	10 to 30 V DC
Wattage	120 mW
Manufacturer	EATON