Description
EATON Prism® Photoelectric Sensor, 3/4-Wire, Tubular Shape, Polarized Retroreflective Sensing Method, 10 ft Sensing, Red Laser Sensing Beam, 3 ms Response, Solid State Relay Output, 10 to 30 V DC, 110 mA, 1 W Wattage, 50/60 Hz Frequency, 6.6 ft Cable Connection, LED Light Source, 30 g Over 10 Hz to 2 kHz Vibration, 0.47 in L x 0.71 in W x 2.75 in H Size, NEMA 1/3/4/4X/6/6P/12/13 Enclosure, -13 to 131 deg F Operating, Surface Mounting
Features:
- Small size for use in a wide variety of applications and locations
- High sensing power for longer ranges and resistance to dust and dirt
- Adjustable gain control to ensure peak optical performance
- High noise immunity which greatly reduces problems associated with electrical noise
- DC only models which offer lower cost options in all sensing modes
- Isolated outputs for wiring flexibility
- Short circuit protection is provided by an adjustable instantaneous only
- Highly visible output status LED
- Structural polyurethane foam body, PVC cable and polycarbonate lens
- 400 VAC maximum output isolation
- 200 VAC peak/180 VDC voltage switching capacity
- 10 uA maximum off-state leakage
- 25 Ohm maximum ON-state resistance
- Light steady when output is on
- 80 mA AC load, 110 mA at 132 VDC (derate to 100 mA at 180 VDC) current switching capacity
Applications:
For light to detect the presence or absence of an object, vehicles on-road pickup and delivery food applications
Standards/Approval:
- cUL Recognized,UL Recognized,CE Marked
Warranty:
3 Years
