Timken® KAK1 PS Pillow Block Bearing, 1.003 in Bore, Standard Duty

Description

Timken® Fafnir®, KAK1 PS, Pillow Block Ball Bearing Housed Unit, Standard Duty, Series: KAK Series, 1.003 in Bore, 4.12 in Bolt Center-to-Center Length, 1-5/16 in Base to Bore Centerline, 5-1/2 in Overall Length, 1.513 in Overall Width, 2.69 in Overall Height, Low Base Mounting, Round Bore, Set Screw Locking Device, 240 lb Static Load, 425 rpm Maximum, Polymer

Features:

• The 300 series stainless steel insert provides high resistance to corrosion
• Loads are lighter and corrosion protection is the primary concern
• Specifically designed for light loads and low speeds and has stainless steel setscrews
• The durable, corrosion proof polymer housing has stainless steel crush bushings in the mounting holes and a stainless steel grease fitting with nylon cap
• Polymer resists a broad range of acids and alkalis

Applications:

Food and Beverage, Waste Water, Car Washes, Highway Salt and Sand, Chemical and Rubber, Pharmaceutical, Maritime, Paper Mills and Material Handling Applications

Standards/Approval:

• FDA Compliant
• Precision Class ABEC 1
• USDA Accepted

Base to Bore Centerline	1-5/16 in
Bolt Center-to-Center Length	4.12 in
Bore Diameter	1.003 in
Bore Type	Round
Load Capacity	240 lb Static
Locking Device	Set Screw
Material	Polymer
Maximum Speed	425 rpm
Mounting Type	Low Base
Overall Height	2.69 in
Overall Length	5-1/2 in
Overall Width	1.513 in
Series	KAK Series
Type	Standard Duty
Manufacturer	Fafnir®