IDC Select® Pillow Block, 40 mm Bore, UCPK Series, Cast Iron

Description

IDC Select® Pillow Block, Low Center Height Standard-Duty Solid Base, Series: UCPK, 40 mm Bore, 140 mm Bolt Center-to-Center Length, 49.21 mm Base to Bore Centerline, 181 mm Overall Length, 100 mm Overall Height, 49.2 mm Base Width, Set Screw Locking Device, Dual Contact Seal, 29.5 kN Load, -40 to 250 deg F, Cast Iron

Features:

• Dual heavy duty slinger type contact seals
• Cup point setscrews 120 deg apart lock unit securely to shaft
• Fully self-aligning
• 1-piece solid base cast iron housing
• 29.5 kN dynamic/18.1 kN static load capacity

Standards/Approval:

• ABMA Standard

Base to Bore Centerline	49.21 mm
Base Width	49.2 mm
Bolt Center-to-Center Length	140 mm
Bore Diameter	40 mm
Load Capacity	29.5 kN
Locking Device	Set Screw
Material	Cast Iron
Overall Height	100 mm
Overall Length	181 mm
Seal Type	Dual Contact
Series	UCPK
Temperature Rating	-40 to 250 deg F
Type	Low Center Height Standard-Duty Solid Base
Manufacturer	IDC Select®