Zoeller® 160 Submersible Pump, 100 gpm, 1/2 hp, Cast Iron

Description

Zoeller® Submersible Effluent Pump, 1-Seal, Series: 160, 100 gpm, 1-1/2 in NPT Outlet, 86.5 ft Maximum Head, 1/2 hp, 460 VAC, 2.9 A, 60 Hz Frequency, 3 ph, 3450 rpm Motor, 4-Wire Cord, Non-Clogging Vortex Impeller, 130 deg F, Ball Bearing, Cast Iron, 12-3/4 in W x 19-5/16 in H Dimensions

Features:

• Durable, cast iron constructed switch case, base, motor and pump housing
• Cast iron class 25 to 30 (25000 lb tensile strength)
• Impeller - bronze class 85-5-5-5
• Corrosion-resistant, powder coated epoxy finish
• Oil filled, hermetically-sealed, automatic reset thermal overload protected motor
• Upper and lower ball bearing running in bath of oil
• Carbon and ceramic shaft seal
• No screens to clog
• Neoprene square ring and gasket
• Stainless steel screws, bolts, float rod, handle, guard, arm and seal assembly
• Passes 3/4 in (19 mm) spherical solids
• 100% of units are computerized tested
• Bronze impeller

Applications:

Onsite/Septic, Enhanced Flow Step Systems and Commercial Dewatering

Standards/Approval:

• CSA Certified
• SAE 1117 Carbon Steel Motor Shaft
• SSPMA Certified
• UL Listed

Amperage Rating	2.9 A
Bearing Type	Ball
Cord Type	4-Wire
Dimensions	12-3/4 in W x 19-5/16 in H
Flow Rate	100 gpm
Frequency Rating	60 Hz
Horsepower	1/2 hp
Impeller Type	Non-Clogging Vortex
Material	Cast Iron
Maximum Head	86.5 ft
Motor Speed	3450 rpm
Outlet Size	1-1/2 in NPT
Phase	3
Series	160
Temperature Rating	130 deg F
Type	1-Seal
Voltage Rating	460 V AC
Manufacturer	Zoeller®