Description
Zoeller® Submersible Pump, Single Seal, Series: Aqua-Mate, 82 gpm, 115 VAC, 5.5 A, 1 ph, 4/10 hp, 19-1/2 ft Maximum Head, Float Switch, 2 in NPT Discharge Pipe, 2 Pole, Class B Insulation, 110 deg F, 2 in Solids Handling, Plastic, 3400 rpm Motor
Features:
- Submersible pumps for sewage/effluent or dewatering, pass 2 in spherical solids, 2 in NPT discharge
- No sheet metal parts to rust or corrode
- All stainless steel screws, switch arm and lower motor housing
- 2-pole, float operated mechanical switch
- Solid polypropylene float
- 110 deg F maximum temperature for dewatering
- 13 in on point and 5-3/4 in off point
- All models completely submersible and hermetically sealed
- Watertight and dust tight
- Sizing of effluent systems normally requires variable level float controls and properly sized basins to achieve required pumping cycles or dosing timers with non-automatic pumps
- Reserve powered design
- For unusual conditions a reserve safety factor is engineered into the design of every Zoeller® pump
- 10 ft auto/15 ft non auto, 3-prong plug cord type
- Auto reset thermal overload motor protection
- Upper and lower ball bearing
- Engineered plastic for pump housing/base/impeller
- Carbon and ceramic for mechanical seals, non-clogging vortex impeller type, stainless steel hardware, 410 stainless steel motor shaft, Buna-N O-ring gasket
Applications:
Variable Level Float Switches, Variable Level Long Cycle Systems and Alarm Systems
Standards/Approval:
