Description
Wilkerson® by Dixon®Desiccant Dryer, Manual In-Line, X03 Series, 1/4 in NPT Inlet, 10 scfm, 150 psig, 125 deg F, Polycarbonate Bowl, 4.63 in Width, 12-1/4 in Height
Features:
- Desiccant is good for approximately 440 min at maximum continuous air flow before regeneration is required
- To regenerate silica gel desiccant, it must be heated to at least 350 deg F for approximately 3 hrs or until color has changed from pink to blue
- Allow desiccant to cool to room temperature before pouring back into unit bowl
- Silica gel changes from blue to pink to indicate the need to replace or regenerate the desiccant
- Slotted bowl guard for visual detection of color change
- No electrical connection necessary
- Provides atmospheric dew point of -45 deg F with dry desiccant at 100 psi and 70 deg F
Applications:
Manual air dryers are used to remove water vapor from compressed air systems, in applications such as paint spraying, laboratory instruments and small control air systems
Warranty:
Limited
