ZOELLER Sys,Sew-BN266/F18X30-2V2D/10T/MFS

Description

Zoeller®, 912-0020, Sewage Ejector System, Pre-Assembled, Series: 912, 115 gpm Flow Rate, 2 in Outlet, 115 V, 9.4 A, 1 ph, 1/2 hp, 20.5 ft Maximum Head, 2 in NPT Discharge Pipe, Specifications: Non-Clogging Vortex Impeller, 130 deg F, 2 in Solids Handling, Cast Iron, 1725 rpm Motor

Features:

• As with all Zoeller pumps, the Model 266 is 100% Factory Tested
• 10 ft Stack Test to L.A. Code
• The Model 266 sewage pump is built with an engineered plastic base and vortex impeller capable of handling 2 in spherical solids reducing the chance of clogs and downtime
• The pump's 115 V electrical cord seal is sealed in the cover
• The single piggyback pump switch is installed 180 deg from the 4 in inlet to prevent the float from being affected by the inflow of raw sewage
• Discharge pipe is plumbed with a pre-drilled 3/16 in weep hole to prevent the pump from becoming air locked
• The cover comes sealed and bolted down so the system is water and gas tight eliminating the escape of any odor

Applications:

Sewage Ejector

Warranty:

3 Years Limited

Amperage Rating	9.4 A
Discharge Pipe Size	2 in NPT
Flow Rate	115 gpm
Horsepower	1/2 hp
Material	Cast Iron
Maximum Head	20.5 ft
Motor Speed	1725 rpm
Outlet Size	2 in
Phase	1 ph
Series	912
Solids Handling	2 in
Specifications	Non-Clogging Vortex Impeller
Temperature Rating	130 deg F
Type	Pre-Assembled
Voltage Rating	115 V
Manufacturer	Zoeller®