Description
Appleton® Circuit Breaker Panelboard, Explosionproof Factory Sealed, Series: D2P, 120/208 V AC, 250 A, 1 Pole, 10 kA Interrupt, 24 Circuits, QC/QPGF (GFI)/QPGFEP (EPD)/QC (HID) Breaker, 6 AWG to 250 kcmil Wire, Panel Mount, NEMA 3/3R/4/4X/5/7BCD/9EFG/12, Copper Free Aluminum Housing, 32 in H x 19.02 in W x 13.07 in D, Gray
Features:
- Aluminum breaker actuators-spring loaded, corrosion resistant feature self locating design for actuating 1, 2, or 3 pole breakers in any sequence
- Handles lock in either off or on position without interfering with tripping of breakers
- Double door one for junction compartment and one for breaker compartment
- Two O-ring gaskets on each breaker handle shaft to prevent entrance of water or corrosion
- Hinges allow the doors to be lifted off
- Breakers pre-wired to terminal block minimizes installation time
- Insulated neutral lug provided as standard
- Panelboards use standard Cutler-Hammer Quicklag® industrial circuit breakers
- Provision for drains/breathers in both compartments
- Factory sealed no external branch sealing fittings needed (except division 1 groups B and C )
- Type THHN minimum size 10 AWG copper wire - 90 deg C (194 deg F) -used in panelboards, main lug feeder wires are crimped and installed in single conductor
- Stainless steel captive, spring-out Quad-Lead® bolts for ease of access
- Epoxy powder coated finish
- Stainless steel hardware material
- Rotary actuating handles may be individually padlocked
- Both doors are fully gasketed to provide raintight fit for both compartments
- Dust ignitionproof
- Corrosion resistant
Applications:
For protection and control of electrical equipment and circuits such as lighting and heat tracing in hazardous locations or in damp and wet or corrosive conditions
Standards/Approval:
- Buy American Act Compliant
- UL 877
- UL 1203 File No. E12108
- UL Listed for Class I, Div 1 and 2, Groups B, C, D, Class II, Div 1 and 2, Groups E, F, G, Class III
