Timken® E-P2B-TRB-50MM Pillow Block Bearing, 50 mm Bore, Heavy Duty

Description

Timken®, E-P2B-TRB-50MM, Pillow Block Roller Bearing Unit, Heavy Duty Type E, 50 mm Bore, 6-7/8 to 7-1/8 in Bolt Center-to-Center Length, 57.15 mm Base to Bore Centerline, 225.425 mm Overall Length, 88.9 mm Overall Width, 114.3 mm Overall Height, Two-Bolt Base Mounting, Round Bore, 63.5 mm Base Width, Double Set Screw Collar Locking Device, Triple Barrier Seal, Non-Expansion, 10300 lb Dynamic/43000 lb Static Load, -54 to 250 deg F, 3050 rpm Maximum, Cast Iron, E-Coated

Features:

• Industry leading high performance triple-barrier seals result in improved grease retention and are more effective at preventing water and mud/slurry ingress
• Rotating collar acts as an initial flinger and provides an additional barrier
• Electric deposition coatings on housings and collars provide superior corrosion resistance
• Set screws with nylon patch greatly reduce set screw back out, even in the most severe applications
• High performance Timken® bearings provide the highest rating and bearing life
• Double row bearing
• Longer bearing life
• Lower maintenance cost
• Optimized performance
• Increased uptime
• Bearing steel

Applications:

Pulp, Paper, Power Generation, Mining, Cement, Aggregate, Air-Handling Equipment, Water and Waste Water Treatment Industries

Base to Bore Centerline	57.15 mm
Base Width	63.5 mm
Bolt Center-to-Center Length	6-7/8 to 7-1/8 in
Bore Diameter	50 mm
Bore Type	Round
Expansion Type	Non-Expansion
Finish	E-Coated
Load Capacity	10300 lb Dynamic/43000 lb Static
Locking Device	Double Set Screw Collar
Material	Cast Iron
Maximum Speed	3050 rpm
Mounting Type	Two-Bolt Base
Overall Height	114.3 mm
Overall Length	225.425 mm
Overall Width	88.9 mm
Seal Type	Triple Barrier
Temperature Rating	-54 to 250 deg F
Manufacturer	Timken®