Description
O-Z/Gedney Retrofit Cable Support, Type D, 5 in, Molded Canvas Bakelite, 6-1/4 in ID x 6-3/4 in OD x 3-3/4 in H
Features:
- Two or more wires already installed in conduit at voltages to 600 VAC
- Retrofit type split bakelite body with pOZi-grip™ "s-style" wedging plug
- Retrofit type cable support can be installed after conductors are pulled and terminated
- Split body rests on existing bushing atop any conduit raceway
- The two halves of the body are placed around the cables, seated on the existing bushing and securely held together by the steel band set in a groove around the body
- The plug is then wedged between the cables
- Use with all types of insulations at voltages to and including 600 V
- The tapered, knurled insulating inner body surface and pOZi-grip™ plug provide support well in excess of code requirements
- Two molded canvas bakelite halves
- Inside surface is knurled to grip cables
- One-piece plug tapered/knurled body
- 18 to 8 AWG, 6 to 1/0 AWG, 2/0 to 4/0 AWG, 4/0 AWG to 750 kcmil (aluminum/copper clad aluminum/copper) conductor
- 2 to 4 same wire size
- Cable support plugs will not be supplied undrilled
Applications:
For supporting non-armored electrical cables in vertical conduit risers and indoor
Standards/Approval:
- ANSI/UL 514B
- Buy American Act Compliant
- CSA C22.2 #18.3/011584
- UL E-11853
- Buy American Act Compliant
