Timken® Pillow Block Bearing, 2-3/16 in Bore, Heavy Duty, Cast Iron

Description

Timken®, SAOL2 3/16, Pillow Block Ball Bearing Unit, Floating Heavy Duty, Series: SAOL, 2-3/16 in Bore, 10-1/4 in Bolt Center-to-Center Length, 3-3/4 in Base to Bore Centerline, 12-5/8 in Overall Length, 5-1/2 in Overall Width, Two-Bolt Base Mounting, Round Bore, 3-1/2 in Base Width, Eccentric Locking Device, Contact Seal, Non-Expansion (Fixed), 16100 lb Dynamic/10000 lb Static Load, 250 deg F, 4000 rpm Maximum, Cast Iron, Uncoated

Features:

• The floating unit allows the bearing-to move axially as the shaft expands from rising temperatures
• The fixed unit maintains shaft location
• The bearings have a loose internal fit
• The SAOL unit is equipped with a self-aligning SMN wide-inner-ring ball bearing and a self-locking collar
• The external aligning ring is fitted to the spherical surface of the outer-ring
• These types are equipped with oil-type seals
• They're normally fitted for oil lubrication, but they can be equipped for grease lubrication when specified
• Before installation, lubricate with high-grade automotive oil, turbine oil or ball bearing grease
• The units are assembled with a spacer ring (fixed type) by removing the spacer ring, the assembly becomes a floating unit

Applications:

Agriculture, Food Processing, Fans, Blowers and Conveyors

Base to Bore Centerline	3-3/4 in
Base Width	3-1/2 in
Bolt Center-to-Center Length	10-1/4 in
Bore Diameter	2-3/16 in
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Uncoated
Load Capacity	16100 lb Dynamic/10000 lb Static
Locking Device	Eccentric
Material	Cast Iron
Maximum Speed	4000 rpm
Mounting Type	Two-Bolt Base
Overall Length	12-5/8 in
Overall Width	5-1/2 in
Seal Type	Contact
Series	SAOL
Temperature Rating	250 deg F
Manufacturer	Timken®