IDC Select® Pillow Block, 75 mm Bore, 71.5 kN Load

Description

IDC Select® Pillow Block, Medium Duty Solid Base, Series: UCPX, 75 mm Bore, 229 mm Bolt Center-to-Center Length, 88.9 mm Base to Bore Centerline, 330 mm Overall Length, 89 mm Base Width, Set Screw Locking Device, Dual Contact Seal, 71.5 kN Load, -40 to 250 deg F, Cast Iron

Features:

• Dual heavy duty slinger type contact seals
• Wide heat treated inner ring bearing for durability
• Steel plate slingers on both sides for dust exclusion
• Cup point setscrews 120 deg apart lock unit securely to shaft
• Fully self-aligning
• Grease fitting for adding lubricant
• Anti-rotation pin
• 1-piece solid base cast iron housing
• 71.5 kN dynamic/54.2 kN static load capacity

Standards/Approval:

• ABMA Standard

Base to Bore Centerline	88.9 mm
Base Width	89 mm
Bolt Center-to-Center Length	229 mm
Bore Diameter	75 mm
Load Capacity	71.5 kN
Locking Device	Set Screw
Material	Cast Iron
Overall Length	330 mm
Seal Type	Dual Contact
Series	UCPX
Temperature Rating	-40 to 250 deg F
Type	Medium Duty Solid Base
Manufacturer	IDC Select®