IDC Select® UCFCS Flange Mount Ball Bearing Unit, 30 mm Bore

Description

IDC Select® Flange Mount Ball Bearing Unit, Medium Duty, Series: UCFCS, 30 mm Bore, 74.2 mm Bolt Center-to-Center Length, 105 mm Diameter Bolt Circle, 4-Bolt Round Flange Mounting, 127 mm Overall Length/Diameter, 42.9 mm Overall Depth, Set Screw Locking Device, Synthetic Rubber Seal, 25.7 kN Dynamic/15.3 kN Static Load, -40 to 250 deg F

Features:

• Cast iron housing
• Wide heat treated inner ring bearing for durability
• Dual heavy duty contact seals
• Steel plate slingers on both sides for dust exclusion
• Full self-alignment
• Grease fitting for adding lubricant
• Cup point setscrews 120 deg apart lock unit securely to shaft
• Anti-rotation pin
• Bearings are supplied 35 to 40% filled with lithium based NLGI #2 grease and should be relubricated with a compatible grease

Standards/Approval:

• ABMA Standard

Bolt Center-to-Center Length	74.2 mm
Bolt Circle Diameter	105 mm
Bore Diameter	30 mm
Flange Mounting Type	4-Bolt Round
Load Capacity	25.7 kN Dynamic/15.3 kN Static
Locking Device	Set Screw
Overall Depth	42.9 mm
Overall Length/Diameter	127 mm
Seal Material	Synthetic Rubber
Series	UCFCS
Temperature Rating	-40 to 250 deg F
Type	Medium Duty
Manufacturer	IDC Select®

This item has no supplemental files.