Timken® E-P4B-TRB-100MM Pillow Block Roller Bearing, 100 mm Bore, Heavy Du

Description

Timken®, E-P4B-TRB-100MM, Pillow Block Roller Bearing Unit, Heavy Duty Type E, 100 mm Bore, 12-1/4 to 12-3/4 in Bolt Center-to-Center Length, 107.95 mm Base to Bore Centerline, 387.35 mm Overall Length, 158.75 mm Overall Width, 215.9 mm Overall Height, Four-Bolt Base Mounting, Round Bore, 114.3 mm Base Width, Double Set Screw Collar Locking Device, Triple Barrier Seal, Non-Expansion, 26900 lb Dynamic/154000 lb Static Load, -54 to 250 deg F, 1530 rpm Maximum, Cast Iron, E-Coated

Features:

• Industry leading high performance triple-barrier seals result in improved grease retention and are more effective at preventing water and mud/slurry ingress
• Rotating collar acts as an initial flinger and provides an additional barrier
• Electric deposition coatings on housings and collars provide superior corrosion resistance
• Set screws with nylon patch greatly reduce set screw back out, even in the most severe applications
• High performance Timken® bearings provide the highest rating and bearing life
• Double row bearing
• Longer bearing life
• Lower maintenance cost
• Optimized performance
• Increased uptime
• Bearing steel

Applications:

Pulp, Paper, Power Generation, Mining, Cement, Aggregate, Air-Handling Equipment, Water and Waste Water Treatment Industries

Base to Bore Centerline	107.95 mm
Base Width	114.3 mm
Bolt Center-to-Center Length	12-1/4 to 12-3/4 in
Bore Diameter	100 mm
Bore Type	Round
Expansion Type	Non-Expansion
Finish	E-Coated
Load Capacity	26900 lb Dynamic/154000 lb Static
Locking Device	Double Set Screw Collar
Material	Cast Iron
Maximum Speed	1530 rpm
Mounting Type	Four-Bolt Base
Overall Height	215.9 mm
Overall Length	387.35 mm
Overall Width	158.75 mm
Seal Type	Triple Barrier
Temperature Rating	-54 to 250 deg F
Manufacturer	Timken®