Pillow Block Ball Bearing 2.4381 in Bore, Fafnir® RSAO Series

Description

Fafnir® Pillow Block Ball Bearing Housed Unit, Heavy Duty, Series: RSAO Series, 2.4381 in Bore, 11-1/4 in Bolt Center-to-Center Length, 4-1/8 in Base to Bore Centerline, 13-3/4 in Overall Length, 3.904 in Overall Width, 7.344 in Overall Height, Round Bore, 4 in Base Width, Eccentric Self-Locking Collar Locking Device, Contact Seal, 18400 lb Dynamic/11700 lb Static Load, Cast Iron

Features:

• LSAO pillow blocks are equipped with GN-KLLB wide inner ring ball bearings
• All units are suited for installations where the load is heavy in proportion to the shaft diameter or where considerable shock loads exist
• All units are for use in wet or extremely dirty conditions
• These units are pre-lubricated and ready for immediate use, a grease fitting is also provided for relubrication if required
• All units are supplied with a self-locking collar
• RSAO pillow blocks are equipped with GN-KRRB wide-inner-ring ball bearings

Applications:

Agricultural, Food Processing, Fans, Blowers and Conveyors Applications

Standards/Approval:

• Precision Class ABEC 1

Base to Bore Centerline	4-1/8 in
Base Width	4 in
Bolt Center-to-Center Length	11-1/4 in
Bore Diameter	2.4381 in
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Uncoated
Load Capacity	18400 lb Dynamic/11700 lb Static
Locking Device	Eccentric Self-Locking Collar
Material	Cast Iron
Maximum Speed	2210 rpm
Mounting Type	Two-Bolt Base
Overall Height	7.344 in
Overall Length	13-3/4 in
Overall Width	3.904 in
Seal Type	Contact
Series	RSAO Series
Manufacturer	Fafnir®