WATTS® Diverter Ball Valve, 1-1/2 in, LFB6780M1, Brass, Gas/Liquids

Description

WATTS® Diverter Ball Valve, 2-Piece, Series: LFB6780M1, 1-1/2 in Nominal, FNPT End Style, 400 psi WOG Pressure, 0 to 350 deg F, 49 gpm Flow Rate, Full Port, Media: Gas/Liquids, 1-1/2 in Orifice, Lever Handle Actuator, Brass Ball, 4-7/16 in Inlet to Outlet Length, 3 in Top to Inlet Center, Bronze Body, Brass/PTFE Trim, PTFE Softgoods

Features:

• Threaded NPT end connections
• Blowout proof pressure retaining stem
• Vinyl insulator on heavy duty zinc plated carbon steel handles
• Low operating torque
• Each valve factory tested
• Virgin PTFE stem packing seal
• The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight
• 400 Psi (28 bar) WOG non-shock at 100 deg F (38 deg C)

Applications:

For Commercial and Industrial Applications

Standards/Approval:

• PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Warranty:

Limited

Actuator Type	Lever Handle
Ball Material	Brass
Body Material	Bronze
End Style	FNPT
Flow Rate	49 gpm
Inlet to Outlet Length	4-7/16 in
Media	Gas/Liquids
Nominal Size	1-1/2 in
Orifice Size	1-1/2 in
Port Type	Full
Pressure Rating	400 psi WOG
Series	LFB6780M1
Softgoods Material	PTFE
Temperature Rating	0 to 350 deg F
Top to Inlet Center	3 in
Trim Material	Brass/PTFE
Type	2-Piece
Manufacturer	WATTS®