Description
O-Z/Gedney Ground Bushing, Type HBLG Insulated, 1-1/4 in Trade, 14 AWG Minimum Wire, 4 AWG Maximum Wire, Lay-In/Set Screw Lug, 2 in Diameter, 3/4 in Height, 1-1/2 in Turning Radius, Malleable Iron, Hot Dipped/Mechanical Galvanized
Features:
- Tin plated copper saddle for use with copper or aluminum conductors from 8 to 4/0 AWG
- Copper conductor only for 14 to 4 AWG lug and 250 to 500 kcmil lug
- Allows easy insertion of grounding conductor for through or end connection
- Low grounding connector profile
- Spring action design maintains positive firm contact on grounding conductor
- Set screw provides fixed alignment and positive ground continuity
- Phenolic insulation, with 150 deg C UL rating, molded on over metallic conduit stop will not shatter or shrink at sub zero temperatures
- Lugs not sold separately
- O-Z/Gedney specification grade insulated bushings provide a grounding lug to allow for grounding of conduit through the insulated bushing
- Protects insulated conductors from abrasion during pulling and mechanical vibration
- Provides voltage gradient between line conductors and ground at point of electrical and mechanical stress on conductor insulation
- Mechanically galvanized finish provides a plating thickness equivalent to hot dipped process, meeting ASTM A-153 performance criteria
- Unlike the hot dipped process, mechanical galvanizing provides
Applications:
For threaded rigid and IMC conduit
Standards/Approval:
- ARRA Compliant
- ANSI 514B
- UL 514B
- ANSI 467
- UL 467
- UL File No. E24264
- CSA C22.2 No. 41
- CSA 015978
- ASTM A-153
- Federal Specification No. W-F-408E
