Timken® YAK 5/8, Pillow Block Bearing, 5/8 in Bore, Cast Iron

Description

Timken®, YAK 5/8, Pillow Block Ball Bearing Unit, Normal Duty, Series: YAK, 5/8 in Bore, 3.626 in Bolt Center-to-Center Length, 1.063 in Base to Bore Centerline, 4.874 in Overall Length, 1-5/64 in Overall Width, 2.094 in Overall Height, Two-Bolt Base Mounting, Round Bore, 1.189 in Base Width, Set Screw Locking Device, Shroud Seal, Non-Expansion (Fixed), 2150 lb Dynamic/1070 lb Static Load, 250 deg F, 7370 rpm Maximum, Cast Iron, Uncoated

Features:

• Incorporates shaft guarding technology, which reduces replacement time, provides shaft protection and prolongs the life of the shaft
• Heavier than our standard block with solid, flat feet for increased strength
• Timken® series low-base set screw pillow blocks feature the GY-KRRB bearing
• Well-suited for industrial applications with normal loads due to its full-width inner-ring set screw
• All units are supplied with GY-KRRB wide-inner-ring bearing and set screw locking

Applications:

Agriculture, Food Processing, Fans, Blowers and Conveyors

Base to Bore Centerline	1.063 in
Base Width	1.189 in
Bolt Center-to-Center Length	3.626 in
Bore Diameter	5/8 in
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Uncoated
Load Capacity	2150 lb Dynamic/1070 lb Static
Locking Device	Set Screw
Material	Cast Iron
Maximum Speed	7370 rpm
Mounting Type	Two-Bolt Base
Overall Height	2.094 in
Overall Length	4.874 in
Overall Width	1-5/64 in
Seal Type	Shroud
Series	YAK
Manufacturer	Timken®