Description
O-Z/Gedney Conduit Sealing Fitting, Type EYAM Dust-Ignitionproof Explosionproof Raintight Horizontal Vertical, 1-1/4 in Size, For Use With: IMC/Rigid Metal Conduit, Malleable Iron, Electroplated Zinc, 1-7/8 in Dia x 5-13/16 in L Dimensions
Features:
- To seal conduits in vertical or horizontal runs
- To minimize the passage of gases and vapors and prevent the passage of flames from one portion of the electrical system to another through the conduit
- 25% conductor fill
- Use with type EYC sealing compound and type EYF fiber
- Prevent passage of gases, vapors or flames from one portion of conduit system to another
- Restrict any explosion to the sealed off enclosure
- Prevent pressure piling within conduit system
- Required in class I, division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
- Required in class I, division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps
- Required in class I, division 1 and 2 locations at the boundary where conduit leaves classified location
- Required in class I, division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit, seal must be located within 18 in of either enclosure
- Required where cables (which exceed rate of gas or vapor transmission permitted for seals) are used in class I, division 2 locations
- Smooth, rounded integral bushing in each hub to protect conductor insulation
- Accurately tapped, tapered threads for tight, rigid joints and ground continuity
- Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
- Large opening for damming and filling
Standards/Approval:
- UL File No. E34997
- CSA 009795
- Class I Division 1/2 Group C/D
- Class I Zone 1/2 Group IIA and IIB
- Class II Division 1/2 Group E/F/G
- Class III
- UL 886
- CSA C22.2
- Number 30 NEC Article 500-503 & 505
- Mil-F-28675
Warranty:
Limited
