Description
O-Z/Gedney Conduit Sealing Bushing, Type CSBG Explosionproof, 2-1/2 in Conduit, (1) 1.32 in, (2) 0.96 in, (3) 0.89 in, (4) 0.78 in AC Cable Size, -40 to 200 deg F, 3-3/8 in Dia
Features:
- The complete assembly is provided with 1 or multiple holes to accommodate the size and number of cables which emerge from the conduit
- When the fitting is in place and the screws are tightened, the neoprene sealing ring is compressed between the metal plates and is forced against the inside wall of the conduit and also against the cable insulation to effect a complete seal at the conduit end
- These fittings are simple to install
- They eliminate the special preparation of the end of the conduit or the compounding of the conduit thread which is required on other types of sealing fittings used to seal against high pressures
- Type CSBG fittings are capable of sealing against gas or fluid pressure of 100 psig, (non-segmented)
- Can also be supplied with lay in lug grounding wire connector
- Prevents the sealing bushing from moving out of the end of the conduit should the internal pressure be high or if the fitting is used on conduit in an inverted position
- Slotted PVC coated steel discs, neoprene sealing ring and stainless steel socket head cap screws and washers
- Blank fittings are intended as abandonment and future use devices only, blank fittings cannot be field drilled
- Hot-dipped galvanized malleable ductile iron locking collar
Applications:
For use with insulated wire, cable and rigid metal conduit
Standards/Approval:
- ARRA Compliant
- Buy American Act Compliant
- UL File No. E14817
- Class I, Division 2 per NEC 501.10(B)(4)
