Description
WATTS® Ball Valve, 2-Piece, Series: LFB6400, 4 in Nominal, FNPT End Style, 400 psi WOG Pressure, -55 to 450 deg F, 450 gpm Flow Rate, Standard Port, Media: Gas/Liquids, 3 in Orifice, Lever Handle Actuator, 316 Stainless Steel Ball, 7-11/16 in Inlet to Outlet Length, 5 in Top to Inlet Center, Copper Silicon Alloy Body, 316 Stainless Steel/Carbon/Glass Reinforced PTFE Durafill® Trim, Glass Reinforced PTFE Softgoods
Features:
- Adjustable stem packing gland
- Blowout proof pressure retaining stem
- Durafill (carbon/glass filled PTFE) seats are standard for longer lasting seats inch high or low temperature applications
- Stainless steel ball is wiped clean during each operation of the valve
- High cycle life reinforced PTFE stem packing seal and thrust washer
- Vinyl insulator on heavy duty zinc plated carbon steel handles
- Excellent for throttling and balancing application of non-abrasive fluids where minimum flow is 20 to 100 Percent of valve capacity
- The wetted surface of this product contacted by consumable water contains less than 0.25 Percent of lead by weight
Applications:
For Commercial and Industrial Applications
Standards/Approval:
- BAA/ARRA Compliant
- NSF/ANSI 372
- MSS-SP-110
- PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty:
Limited
